Request Information
Unit of Measure
Items
1 Maximum Blocks Normally Open (NO) + Normally Closed (NC) Instantaneous Auxiliary Contact

1 Maximum Blocks Normally Open (NO) + Normally Closed (NC) Instantaneous Auxiliary Contact
BOM

1 Maximum Blocks Normally Open (NO) + Normally Open (NO) Instantaneous Auxiliary Contact

1 Maximum Blocks Normally Open (NO) + Normally Open (NO) Instantaneous Auxiliary Contact
BOM

2 Maximum Blocks Normally Open (NO) + Normally Closed (NC) Instantaneous Auxiliary Contact

2 Maximum Blocks Normally Open (NO) + Normally Closed (NC) Instantaneous Auxiliary Contact
BOM

2 Maximum Blocks Normally Open (NO) + Normally Closed (NC) Instantaneous Auxiliary Contact (AX5211)

2 Maximum Blocks Normally Open (NO) + Normally Open (NO) Instantaneous Auxiliary Contact
BOM

2 Maximum Blocks Normally Open (NO) + Normally Closed (NC) Instantaneous Auxiliary Contact (AX5211)

2 Maximum Blocks Normally Closed (NC) + Normally Closed (NC) Instantaneous Auxiliary Contact
BOM
Description N/A
Brands N/A NOARK®
Mounting Location N/A Front Mount N/A Front Mount N/A Left Side N/A Left Side N/A Left Side
Maximum Number of Blocks N/A 1 N/A 1 N/A 2 N/A 2 N/A 2
Contacts N/A Normally Open (NO) + Normally Closed (NC) N/A Normally Open (NO) + Normally Open (NO) N/A Normally Open (NO) + Normally Closed (NC) N/A Normally Open (NO) + Normally Open (NO) N/A Normally Closed (NC) + Normally Closed (NC)
Available As N/A
  • Up to 32A at 600 Vac
  • Type E and F combinations
  • Built-in fault indication
  • Full range of accessories
  • Lockable handle
Certifications N/A
  • UL 60947-1/60947-4-1 listed file No. E467185
  • UL 508 Listed, file No. E476273
  • IEC/EN 60947-2/-4-1
  • CCC Certified
Standards Compliance N/A
  • IEC/EN 60947-1, -2, -4-1, -5-1 Compliant
  • UL 508
  • UL 60947-1;-4-1
  • UL 489
  • Green Belt (GB) 14048.2
  • Green Belt (GB) 14048.4
Features N/A Ex9S32 Manual Motor Starter provide manual isolation, manual motor control, and overcurrent protection. Ex9S32 Manual Motor Starters are electro-mechanical devices combining the functions below in one unit.
  • Disconnect for Motor Branch Circuit
  • Manual Motor Control
  • Branch-Circuit Short Circuit Protection (Magnetic Protection)
  • Overload Protection (Thermal Protection) - Trip Class 10
  • Switching (Manual)
In North American Electrical Codes require an individual Motor Branch Circuit be protected by a UL/CSA Listed Fuse, Circuit breaker or Self-Protected Combination Motor Controller.