Brands |
N/A NOARK® |
Continuous Current |
N/A 3 A |
Cam Setting |
N/A A B C D E |
Full Load Current at Cam Setting A |
N/A 1.6 to 1.7 A |
Full Load Current at Cam Setting B |
N/A 1.8 to 1.9 A |
Full Load Current at Cam Setting C |
N/A 2.0 to 2.2 A |
Full Load Current at Cam Setting D |
N/A 2.3 to 2.4 A |
Full Load Current at Cam Setting E |
N/A 2.5 to 2.6 A |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting A |
N/A 21 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting B |
N/A 24 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting C |
N/A 27 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting D |
N/A 30 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting E |
N/A 33 |
Rated Current at 480 Alternating Current (AC) Voltage |
N/A 100 kA |
Connection Type |
N/A H Interrupting - Lug Line/Load Side Connection |
Features |
N/A
The traditional system used for this purpose is based on three different devices: a circuit breaker for protection against short-circuit, a thermal relay for protection against overload and phase loss or unbalance of phase, and a contactor for motor switching. In particular, when selecting these devices, different factors must be taken into consideration, such as:
|
Certifications |
N/A
|