Brands |
N/A NOARK® |
Continuous Current |
N/A 150 A |
Cam Setting |
N/A A B C D E F G |
Full Load Current at Cam Setting A |
N/A 57.7 to 69.1 A |
Full Load Current at Cam Setting B |
N/A 69.2 to 80.6 A |
Full Load Current at Cam Setting C |
N/A 80.7 to 92.2 A |
Full Load Current at Cam Setting D |
N/A 92.3 to 103.7 A |
Full Load Current at Cam Setting E |
N/A 103.8 to 115.2 A |
Full Load Current at Cam Setting F |
N/A 115.3 to 126.7 A |
Full Load Current at Cam Setting G |
N/A 126.9 to 130.5 A |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting A |
N/A 750 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting B |
N/A 900 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting C |
N/A 1050 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting D |
N/A 1200 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting E |
N/A 1350 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting F |
N/A 1500 |
Motor Circuit Protection (MCP) Trip Setting at Cam Setting G |
N/A 1650 |
Rated Current at 240 Alternating Current (AC) Voltage |
N/A 100 kA |
Connection Type |
N/A H Interrupting - Bus Bar Connection |
Features |
N/A
The traditional system used for this purpose is based on three different devices: a circuit breaker for protection against short-circuit, a thermal relay for protection against overload and phase loss or unbalance of phase, and a contactor for motor switching. In particular, when selecting these devices, different factors must be taken into consideration, such as:
|
Certifications |
N/A
|
Note |
N/A Bus Bar Connection MCP not sold with (Bus Bar Connection not available through NOARK® Electric) or Terminal Lugs. |